How To Replace Screen In Patio Door

How to Replace Screen in Patio Door

Replacing the screen in a patio door is a relatively easy and inexpensive project that can be completed in a few hours. By following these step-by-step instructions, you can save yourself the cost of hiring a professional and keep your patio door looking its best.

Materials you will need:

New screen material
Spline
Spline tool
Measuring tape
Scissors
Utility knife

Instructions:

Step 1: Remove the old screen

Start by removing the old screen from the door frame. To do this, insert the tip of a utility knife into the spline that holds the screen in place and carefully cut the spline. Once the spline is cut, you can pull the screen out of the frame.

Step 2: Measure and cut the new screen

Next, measure the width and height of the door frame. Add 2 inches to each measurement to allow for overlap. Cut the new screen material to the desired size.

Step 3: Insert the new screen

Place the new screen over the door frame and center it. Starting at one corner, insert the spline into the groove in the frame. Use the spline tool to push the spline into place along all four sides of the frame.

Step 4: Trim the excess screen

Once the spline is in place, use a utility knife to trim any excess screen material around the edges of the frame.

Step 5: Enjoy your new screen

Your patio door is now complete with a new screen. Enjoy the fresh air and bug-free views!

Tips:

Use a sharp utility knife to cut the spline. A dull knife will make it difficult to cut through the spline and could damage the frame.
Insert the spline into the groove at a 45-degree angle. This will help to keep the spline in place.
Use a spline tool to push the spline into place. A screwdriver or other sharp object can damage the spline.
Trim the excess screen material carefully. Cutting too close to the frame could damage the screen.