How To Put New Screen On Patio Door

How to Put a New Screen on a Patio Door

Patio doors are a great way to bring the outdoors in and let the fresh air circulate. However, the screens on patio doors can get damaged over time, allowing bugs and other pests to enter your home. Replacing a patio door screen is a relatively simple project that can be completed in a few hours.

Materials You'll Need:

New patio door screen
Screen spline
Screen spline tool
Utility knife
Measuring tape
Scissors

Steps:

1. Remove the Old Screen
Start by removing the old screen from the door frame. Most patio door screens are held in place by a rubber spline that fits into a groove around the frame. To remove the spline, use a utility knife to carefully cut it out of the groove. Once the spline is removed, you can pull the old screen out of the frame.

2. Measure and Cut the New Screen
Measure the opening of the door frame to determine the size of the new screen. Cut the screen to the desired size, making sure to leave about 1 inch of excess material around all sides.

3. Insert the New Screen
Place the new screen in the door frame and align it with the edges. Start by inserting the screen into the groove at the top of the frame. Once the top is in place, work your way around the sides and bottom, pressing the screen into the groove until it is secure.

4. Install the Screen Spline
Once the screen is in place, it is time to install the screen spline. Cut the spline to the length of the frame and insert it into the groove around the screen. Use the screen spline tool to push the spline into the groove until it is flush with the frame.

5. Trim the Excess Material
Use a utility knife to trim any excess screen material around the edges of the frame. Be careful not to cut the screen itself.

Tips:

If you are having trouble inserting the screen into the groove, try using a pair of pliers to help you.
If the screen spline is too tight, you can use a hair dryer to soften it up.
If the screen spline is too loose, you can use a pair of pliers to tighten it.

Replacing a patio door screen is a simple project that can be completed in a few hours. By following these steps, you can save yourself the cost of hiring a professional.