How To Make Your Own Concrete Patio Blocks

How to Make Your Own Concrete Patio Blocks

Making your own concrete patio blocks is a great way to save money and add a personal touch to your outdoor space. It's not as difficult as you might think, and with a little planning and preparation, you can create beautiful, durable blocks that will last for years to come.

Here's a step-by-step guide on how to make your own concrete patio blocks:

Materials:

Concrete mix
Gravel
Sand
Water
Block molds
Trowel
Level
Tamper
Curing compound

Instructions:

1. Prepare the molds: Before you begin mixing the concrete, oil the inside of the block molds to prevent the concrete from sticking. You can use a spray lubricant or a brush to apply the oil.

2. Mix the concrete: In a large mixing tub or wheelbarrow, combine the concrete mix, gravel, sand, and water according to the manufacturer's instructions. Mix until the concrete is smooth and consistent.

3. Fill the molds: Fill each block mold with concrete until it is slightly overfilled. Use a trowel to level and smooth the top of the concrete.

4. Tamp the concrete: Use a tamper to compact the concrete and remove any air bubbles. Tamp the concrete evenly until it is firm and level.

5. Remove the molds: Carefully remove the block molds from the concrete. If the concrete is sticky, you can use a trowel to loosen it around the edges.

6. Cure the blocks: Place the blocks on a flat surface and allow them to cure for at least 24 hours. During this time, keep the blocks moist by covering them with plastic or spraying them with water.

7. Apply curing compound: After the blocks have cured for 24 hours, apply a curing compound to the surface. Curing compound will help to prevent the blocks from cracking and will also make them more durable.