How To Make A Circular Patio With Square Pavers

A circular patio is a beautiful and elegant addition to any backyard. It's a great place to relax and entertain guests, and it can also add value to your home. If you're thinking about adding a circular patio to your backyard, here are the steps you need to follow:

1. Choose a location

The first step is to choose a location for your patio. You'll want to choose a spot that is level and has good drainage. You'll also want to make sure that the location is convenient to your home and that it has enough space for your furniture and guests.

2. Determine the size of your patio

Once you've chosen a location, you need to determine the size of your patio. The size of your patio will depend on how many people you want to be able to accommodate and how much space you have available. A good rule of thumb is to make your patio at least 10 feet in diameter.

3. Mark out the circle

Once you know the size of your patio, you need to mark out the circle. You can do this using a string and a stake. Tie one end of the string to the stake and then walk around the perimeter of your patio, keeping the string taut. When you get back to your starting point, the string will have created a circle.

4. Excavate the area

Once you've marked out the circle, you need to excavate the area. The depth of the excavation will depend on the type of pavers you're using and the thickness of the base material. A good rule of thumb is to excavate the area to a depth of 6 inches.

5. Install the base material

Once you've excavated the area, you need to install the base material. The base material will help to level the ground and provide a stable base for your pavers. A good choice for base material is crushed gravel or sand.

6. Compact the base material

Once you've installed the base material, you need to compact it. This will help to ensure that the base is level and stable. You can compact the base material using a hand tamper or a plate compactor.

7. Install the pavers

Once the base material is compacted, you can start installing the pavers. Start by laying the pavers around the perimeter of the circle. Once you've laid the perimeter, you can start filling in the center. Be sure to stagger the joints between the pavers and to tap them into place using a rubber mallet.

8. Fill the joints

Once you've installed the pavers, you need to fill the joints. This will help to keep the pavers in place and to prevent weeds from growing between them. A good choice for joint filler is polymeric sand.

9. Seal the patio

Once you've filled the joints, you need to seal the patio. This will help to protect the pavers from the elements and to make them easier to clean. A good choice for patio sealer is a penetrating sealer.