How To Fix A Screen Patio Door

Fixing a screen patio door is a relatively simple task that can be completed in a few hours. With the right tools and materials, you can easily repair a torn screen, replace a damaged track, or adjust the door to make it open and close smoothly. ### Tools and Materials * Screwdriver * Pliers * Utility knife * Measuring tape * New screening material * New track (if necessary) * Screws * Nails ### Step-by-Step Instructions 1.

Remove the damaged screen.

Use a screwdriver to remove the screws that hold the screen frame in place. Carefully remove the frame and screen from the door. 2.

Inspect the track.

If the track is damaged, it will need to be replaced. Use a measuring tape to determine the length of the track and purchase a new one of the same size. 3.

Install the new track.

Place the new track in the door frame and secure it with screws. Make sure the track is level and aligned with the door. 4.

Cut the screening material.

Measure the opening in the door frame and cut a piece of screening material to fit. The material should be slightly larger than the opening so that it can be stretched and secured. 5.

Attach the screening material.

Place the screening material over the opening in the door frame. Stretch the material and secure it with nails or staples. Trim any excess material around the edges. 6.

Reinstall the screen frame.

Place the screen frame back in the door frame and secure it with screws. Make sure the frame is square and aligned with the door. 7.

Adjust the door.

If the door is not opening and closing smoothly, it may need to be adjusted. Use a screwdriver to adjust the screws that hold the door in place. Make small adjustments until the door opens and closes smoothly. ### Tips * If the screen is only slightly torn, you can repair it using clear nail polish or fabric glue. * If the track is only slightly damaged, you can try to repair it using epoxy or super glue. * When cutting the screening material, make sure to leave a few inches of excess material around the edges. This will allow you to stretch the material and secure it properly. * When reinstalling the screen frame, make sure to use screws that are the same size as the original screws.