How To Put Screen On Patio Door

How to Install a Screen on a Patio Door

Installing a screen on a patio door is a relatively simple task that can be completed in a few hours. By following these steps, you can add a layer of protection to your home while also enjoying the fresh air and natural light.

Step 1: Gather Your Materials

Before you begin, you will need to gather the following materials:

A patio door screen
A measuring tape
A utility knife
A screwdriver
A hammer
Nails

Step 2: Measure the Patio Door

The first step is to measure the patio door to determine the size of the screen you need. Measure the width and height of the door, and then add 2 inches to each measurement. This will give you the size of the screen you need to purchase.

Step 3: Cut the Patio Door Screen

Once you have the screen, you will need to cut it to size. Place the screen on a flat surface and use the measuring tape to mark the cut lines. Use the utility knife to carefully cut the screen along the lines you have marked.

Step 4: Install the Patio Door Screen

Now you can install the screen on the patio door. There are typically three ways to install a screen on a patio door:

Spring clips: The screen frame has spring clips on the inside that grip the edges of the door frame.
Screws: The screen frame has holes for screws that are driven into the door frame.
Nails: Nails are driven through the screen frame and into the door frame.

Follow the instructions for your particular screen type to install it properly.

Step 5: Test the Patio Door Screen

Once the screen is installed, open and close the patio door to test it. Make sure that the screen fits snugly and does not sag or come loose.

Installing a screen on a patio door is a simple task that can provide a number of benefits. By following these steps, you can protect your home from insects and other pests while also enjoying the fresh air and natural light.