Fire Sense Patio Heater Natural Gas Conversion

Essential Aspects of Fire Sense Patio Heater Natural Gas Conversion

Fire Sense patio heaters are a popular choice for homeowners who want to extend their outdoor living season. These heaters provide instant warmth and can be used in a variety of settings, from patios and decks to garages and workshops. While most Fire Sense patio heaters are powered by propane, they can be converted to natural gas with a simple conversion kit.

Converting your Fire Sense patio heater to natural gas is a relatively simple process that can be completed in a few hours. However, it is important to follow the instructions carefully to ensure that the conversion is done safely and correctly.

Here are the essential aspects of Fire Sense patio heater natural gas conversion:

1. Gather your tools and materials. You will need the following tools and materials to complete the conversion:

Fire Sense patio heater natural gas conversion kit
Wrench
Screwdriver
Natural gas line
Gas shutoff valve
Thread sealant

2. Turn off the gas supply. Before you begin working on the heater, turn off the gas supply at the propane tank or natural gas line.

3. Disconnect the propane tank or natural gas line. Once the gas supply is turned off, disconnect the propane tank or natural gas line from the heater.

4. Remove the burner assembly. The burner assembly is located at the bottom of the heater. Remove the screws that hold the burner assembly in place and then carefully lift the burner assembly out of the heater.

5. Install the natural gas orifice. The natural gas orifice is included in the conversion kit. Remove the propane orifice from the burner assembly and replace it with the natural gas orifice.

6. Reinstall the burner assembly. Carefully place the burner assembly back into the heater and secure it with the screws.

7. Connect the natural gas line. Connect the natural gas line to the heater. Be sure to use thread sealant on the connection.

8. Turn on the gas supply. Slowly turn on the gas supply at the propane tank or natural gas line.

9. Light the heater. Follow the instructions in your heater's manual to light the heater.

10. Check for leaks. Once the heater is lit, check for leaks around the gas connection. If you see or smell any gas, turn off the heater and call a qualified technician.

Converting your Fire Sense patio heater to natural gas is a simple process that can be completed in a few hours. By following these instructions carefully, you can ensure that the conversion is done safely and correctly.