How To Change Sliding Glass Patio Doors

How to Change Sliding Glass Patio Doors

Sliding glass patio doors are a popular choice for homes because they offer a large opening to the outdoors, letting in lots of natural light. However, if your sliding glass patio doors are old or damaged, they can be a major source of heat loss and can make your home less secure. Replacing sliding glass patio doors is a relatively easy project that can be completed in a day or two. Here are the steps on how to change sliding glass patio doors:

1. Remove the Old Doors

To remove the old doors, first remove the trim around the door frame. Then, use a pry bar to carefully pry the doors away from the frame. Be careful not to damage the frame.

2. Install the New Doors

Once the old doors are removed, you can install the new doors. To do this, first place the new doors in the frame and make sure they are level. Then, screw the doors into the frame. Finally, replace the trim around the door frame.

3. Adjust the Doors

Once the new doors are installed, you need to adjust them so that they slide smoothly and lock properly. To do this, adjust the rollers on the bottom of the doors. You may also need to adjust the strike plate on the door frame. To make sure the doors are locking properly, try to open the door and then re-lock it.

4. Caulk and Seal the Doors

Once the doors are adjusted, you need to caulk and seal them to prevent air and water from leaking in. To do this, apply a bead of caulk around the perimeter of the door frame. Then, use a sealant to seal the gaps around the doors.

5. Enjoy Your New Doors

Once the doors are caulked and sealed, you can enjoy your new sliding glass patio doors. They will let in lots of natural light and make your home more secure.