How To Put A New Screen In Patio Door

Replacing the screen on a patio door is a relatively simple DIY project that can be completed in a few hours. By following these step-by-step instructions, you can save yourself the cost of hiring a professional.

Tools and Materials You'll Need:

New screen material
Spline roller
Spline
Utility knife
Measuring tape
Scissors

Instructions:

Measure and cut the screen material: Measure the height and width of the door opening, and add 2 inches to each measurement. Cut the screen material to these dimensions.
Remove the old screen: Using a utility knife, carefully cut the spline around the edges of the screen. Once the spline is removed, the screen material will come loose.
Insert the new screen: Center the new screen material over the door opening and insert it into the spline channel around the edges.
Roll in the spline: Insert the spline into the spline roller and roll it around the edges of the door opening, pressing it firmly into the channel.
Trim the excess screen: Once the spline is in place, use a utility knife to trim any excess screen material around the edges.

Tips:

Use a high-quality screen material that is resistant to tears and punctures.
Make sure the spline is securely rolled into the channel to prevent the screen from sagging or coming loose.
If you are replacing a screen that has a pet door, you will need to cut a hole in the new screen material and install the pet door before inserting the screen into the door opening.

Conclusion:

Replacing the screen on a patio door is a simple and inexpensive task that can be completed in a few hours. By following these instructions, you can save yourself the cost of hiring a professional and enjoy the benefits of a new, durable screen.