How To Replace Screen In A Patio Door

Replacing the screen in a patio door is a relatively simple task that can be completed in a few hours with the right tools and materials. Here's a step-by-step guide to help you get the job done:

Tools and materials you'll need:

New screen material
Screen spline
Screen roller
Screwdriver
Utility knife
Measuring tape

Step 1: Measure and cut the screen material

Start by measuring the height and width of the screen frame. Add 2 inches to each measurement to allow for overlap. Cut the screen material to the desired size.

Step 2: Remove the old screen

Locate the spline that holds the old screen in place. Use a screwdriver to carefully pry the spline out of the groove. Once the spline is removed, you can pull the old screen out of the frame.

Step 3: Clean the screen frame

Use a damp cloth to clean the screen frame to remove any dirt or debris. Allow the frame to dry completely before continuing.

Step 4: Install the new screen

Place the new screen material over the frame and center it. Starting at one corner, insert the screen spline into the groove around the frame. Use the screen roller to press the spline into place.

Step 5: Trim the excess screen material

Once the spline is installed, use a utility knife to trim any excess screen material around the edges of the frame.

Step 6: Test the screen

Open and close the patio door to make sure the screen is installed correctly and is not sagging or torn.

Tips:

Use a high-quality screen material that is resistant to tears and punctures.
Make sure the screen spline is the correct size for the frame.
If you have any questions or concerns, consult a professional.

Replacing the screen in a patio door is a relatively simple task that can be completed in a few hours with the right tools and materials. By following these steps, you can save money and keep your patio door looking its best.