How To Make A Patio Cover With Tarp

How to Build a Patio Cover with a Tarp

A patio cover is a great addition to any home, providing shade and protection from the elements. While there are many different types of patio covers available for purchase, you can also build your own using a tarp. This is a relatively inexpensive and easy project that can be completed in a few hours. Here are the steps on How To Make A Patio Cover With Tarp:

Materials:

Tarp (size will vary depending on the size of your patio)
4-6 posts (4x4 or 6x6 lumber)
Concrete mix
Drill
Screws or nails
Rope or twine

Instructions:

1. Determine the size and location of your patio cover. The tarp should be large enough to cover the entire patio, plus a few feet on each side for overhang. The posts should be placed around the perimeter of the patio, spaced evenly apart.

2. Dig holes for the posts. The holes should be deep enough so that the posts are buried at least 2 feet underground. The diameter of the holes should be slightly larger than the diameter of the posts.

3. Place the posts in the holes and fill them with concrete mix. Tamp down the concrete mix firmly around the posts. Allow the concrete to cure for at least 24 hours before continuing.

4. Attach the tarp to the posts. You can do this by drilling holes in the tarp and screwing or nailing it to the posts. Alternatively, you can use rope or twine to tie the tarp to the posts.

5. Secure the tarp. Once the tarp is attached to the posts, you need to secure it so that it doesn't blow away in the wind. You can do this by tying it down to the ground with stakes or weights. You can also add a valance or skirt around the perimeter of the tarp to help keep it in place.

Your patio cover is now complete! Enjoy the shade and protection it provides for years to come.